DIN 985 Lock Nut M16 304 Stainless Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.
Specifications
| Standard | DIN 985 |
| Material | 304 Stainless Steel |
| Grade | A2-70 |
| Diameter | M16 |
| Thread | Fine Thread |
| Surface Finish | Plain |
| Variant | Blue Nylon |
| Brand | SFX Fasteners |
Manufactured to DIN 985. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.
Ordering & shipping
| Minimum order | No minimum — single pieces welcome |
| Pricing | Order totals are confirmed at checkout, before payment |
| Custom & dropship | Small batches to drawing · blind dropshipping on request |
| Dispatch | 24–48 hours for stock items |
| Shipping | Worldwide, calculated at checkout by weight and destination |
Need a specific size, grade or standard? Send us a quote request — we quote to drawing and to DIN / ANSI / GB / JIS standards.
About this DIN 985 nut
This is a nut made to DIN 985, in 304 Stainless Steel, at strength class A2-70, supplied plain, with an M16 thread. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.
A nut is the closing half of a bolted joint. Its property class is chosen to match the bolt it is paired with — a class 8 nut for a grade 8.8 bolt, so the thread strips before the bolt breaks. Used wherever a bolt or stud has to be tightened from the far side, and for locking and positioning duties on machinery and steelwork.
DIN 985 is the same part as ISO ISO 10511, GB/T GB/T 889.1. Check the head geometry, the key size and the tolerances before substituting one for another — those do differ between systems.
304 (EN 1.4301, A2) is the general-purpose austenitic stainless grade: good resistance to fresh water, food acids and atmospheric corrosion, non-magnetic in the annealed state. It is the default for indoor and general outdoor fastening where chlorides are low.
Is this not quite the size or grade you need? Ask us — we produce small batches to drawing and to DIN, ISO, GB and JIS standards, and we consolidate pallet and container loads for trade orders.
Reviews
There are no reviews yet.