U-Bolt M6 304 Stainless Steel

U-Bolt M6 304 Stainless Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Specifications

Ordering & shipping

Need a specific size, grade or standard? Send us a quote request — we quote to drawing and to DIN / ANSI / GB / JIS standards.

About this bolt

This is a bolt in 304 Stainless Steel, at strength class A2-70, supplied plain, with an M6 thread. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A bolt passes through the parts it joins and is closed with a nut, so the joint is held by the clamp load the tightened bolt develops rather than by the shank itself. Bolts of this type are used on structural steelwork, machine frames, brackets, flanges and pipework — anywhere the joint has to come apart again for maintenance.

A2-70 is 304 stainless, cold worked to a 700 MPa minimum tensile and 450 MPa 0.2% proof stress. It is the default stainless grade for general purpose bolts and screws.

304 (EN 1.4301, A2) is the general-purpose austenitic stainless grade: good resistance to fresh water, food acids and atmospheric corrosion, non-magnetic in the annealed state. It is the default for indoor and general outdoor fastening where chlorides are low.

This line ships worldwide from our own warehouse. Express courier, air parcel and postal services are all offered at checkout, with a tracking number e-mailed as soon as the parcel is handed over.