DIN 908 Socket Head Plug (ED) M16 304 Stainless Steel

DIN 908 Socket Head Plug (ED) M16 304 Stainless Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Specifications

Manufactured to DIN 908. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Ordering & shipping

Need a specific size, grade or standard? Send us a quote request — we quote to drawing and to DIN / ANSI / GB / JIS standards.

About this DIN 908 fitting

This is a fitting made to DIN 908, in 304 Stainless Steel, at strength class A2-70, supplied plain, with an M16 thread. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

General-purpose hardware that completes a fastening job rather than carrying the load itself. Used in furniture, rigging, cable management and general assembly work alongside the fasteners on this store.

A2-70 is 304 stainless, cold worked to a 700 MPa minimum tensile and 450 MPa 0.2% proof stress. It is the default stainless grade for general purpose bolts and screws.

304 (EN 1.4301, A2) is the general-purpose austenitic stainless grade: good resistance to fresh water, food acids and atmospheric corrosion, non-magnetic in the annealed state. It is the default for indoor and general outdoor fastening where chlorides are low.

This line ships worldwide from our own warehouse. Express courier, air parcel and postal services are all offered at checkout, with a tracking number e-mailed as soon as the parcel is handed over.