Skip to content
DIN 976-1 35K Carbon Steel Grade 4.8 In stock

DIN 976-1 Threaded Rod (Full Thread Stud) M4x45 35K Carbon Steel

SKU: SFXP-20444 · Standard: DIN 976-1

Log in to see prices

Prices exclude shipping and duty.
Order history & reordering. Create an account to save your order history and get quoted delivery on large orders.

Full specification

StandardDIN 976-1
Material35K Carbon Steel
GradeGrade 4.8
DiameterM4
Length45 mm
ThreadCoarse Thread
Surface FinishWhite Zinc Plated
BrandSFX Fasteners
DIN 976-1 Threaded Rod (Full Thread Stud) M4x45 35K Carbon Steel
Dimension drawing — annotated for this diameter and length

Description

DIN 976-1 Threaded Rod (Full Thread Stud) M4x45 35K Carbon Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Specifications

Standard DIN 976-1
Material 35K Carbon Steel
Grade Grade 4.8
Diameter M4
Length 45 mm
Thread Coarse Thread
Surface Finish White Zinc Plated
Brand SFX Fasteners

Manufactured to DIN 976-1. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Ordering & shipping

Minimum order No minimum — single pieces welcome
Pricing Order totals are confirmed at checkout, before payment
Custom & dropship Small batches to drawing · blind dropshipping on request
Dispatch 24–48 hours for stock items
Shipping Worldwide, calculated at checkout by weight and destination

Need a specific size, grade or standard? Send us a quote request — we quote to drawing and to DIN / ANSI / GB / JIS standards.

About this DIN 976-1 threaded rod

This is a threaded rod made to DIN 976-1, in 35K Carbon Steel, at strength class Grade 4.8, supplied white zinc plated, with an M4 thread and a 45 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

Threaded rod and stud bolts are cut to length on site, which is what makes them useful where the thickness of the joint is not known until assembly. Used for hangers, supports, strut and pipe brackets, anchoring into concrete, and as continuous studding through a bolted connection.

Grade 4.8 is low-carbon steel at 400 MPa tensile / 320 MPa yield. Suitable for light-duty, non-critical joints and the cheapest option per piece.

A carbon steel, the default material for structural fastening. Anything grade 8.8 and up needs a coating — zinc, black oxide or Dacromet — or it will rust.

Sold by the piece, so one is a valid order. Stock lines leave our warehouse within 24–48 hours of cleared payment, and freight is calculated at checkout from the packed weight and the destination.

Stock items are picked and dispatched within 24–48 hours from our Foshan warehouse. We ship worldwide by express courier (DHL, FedEx, UPS), air parcel or postal ePacket — you choose the trade-off between cost and speed at checkout. Tracking is provided for every shipment.

If a line arrives with a dimensional or material fault, send photographs and the batch number — we replace it or credit it in full and cover the return freight when the fault is ours. Fasteners are supplied to specification and sold by the piece, so we do not run a general change-of-mind return window, and anything made to your drawing is final sale unless it fails the agreed specification.

We supply 304/316 stainless and grade 8.8/12.9 steel. EN 10204 3.1 mill test certificates are available on request for trade orders. Batch numbers are printed on every carton label.

Reviews

There are no reviews yet.

Be the first to review “DIN 976-1 Threaded Rod (Full Thread Stud) M4x45 35K Carbon Steel”

Your email address will not be published. Required fields are marked *

Browse this specification
Request quote Email us