DIN 985 Lock Nut M3 Aluminium Alloy

DIN 985 Lock Nut M3 Aluminium Alloy — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Technische Daten

Gefertigt nach DIN 985. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Bestellung & Versand

Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.

About this DIN 985 nut

This is a nut made to DIN 985, in Aluminium Alloy, supplied anodised, with an M3 thread. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A nut is the closing half of a bolted joint. Its property class is chosen to match the bolt it is paired with — a class 8 nut for a grade 8.8 bolt, so the thread strips before the bolt breaks. Used wherever a bolt or stud has to be tightened from the far side, and for locking and positioning duties on machinery and steelwork.

Anodising grows a hard, integral oxide layer on aluminium. It adds wear and corrosion resistance and takes dye for colour, without adding measurable thickness.

M3 is a metric thread with an 3 mm nominal diameter and a coarse pitch of 0.5 mm (ISO 261). A standard hex head takes a 5.5 mm spanner across the flats.

Diese Position wird von unserem eigenen Lager weltweit versandt. Express-Kurier, Luftpaket und Postversand stehen an der Kasse zur Wahl; die Sendungsnummer erhalten Sie per E-Mail, sobald das Paket übergeben wurde.