DIN 985 Lock Nut M5 Aluminium Alloy

DIN 985 Lock Nut M5 Aluminium Alloy — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Technische Daten

Gefertigt nach DIN 985. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Bestellung & Versand

Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.

About this DIN 985 nut

This is a nut made to DIN 985, in Aluminium Alloy, supplied anodised, with an M5 thread. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A nut is the closing half of a bolted joint. Its property class is chosen to match the bolt it is paired with — a class 8 nut for a grade 8.8 bolt, so the thread strips before the bolt breaks. Used wherever a bolt or stud has to be tightened from the far side, and for locking and positioning duties on machinery and steelwork.

M5 is a metric thread with an 5 mm nominal diameter and a coarse pitch of 0.8 mm (ISO 261). A standard hex head takes a 8 mm spanner across the flats.

Aluminium alloy is roughly one third the weight of steel with excellent corrosion resistance and conductivity. Use it for lightweight assemblies and check for galvanic corrosion against steel or stainless parts.

There is no minimum order and no free-shipping threshold: buy one piece or a full container. Your order total is confirmed in the cart, before payment.