Wing Nut M12 316 Stainless Steel

Wing Nut M12 316 Stainless Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Technische Daten

Bestellung & Versand

Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.

Über diese Mutter

This is a nut in 316 Stainless Steel, at strength class A4-70, supplied plain, with an M12 thread. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A nut is the closing half of a bolted joint. Its property class is chosen to match the bolt it is paired with — a class 8 nut for a grade 8.8 bolt, so the thread strips before the bolt breaks. Used wherever a bolt or stud has to be tightened from the far side, and for locking and positioning duties on machinery and steelwork.

A4-70 is 316 stainless at 700 MPa minimum tensile — the standard grade for stainless fasteners that meet chlorides, marine air or food plant.

316 (EN 1.4401, A4) adds 2–3% molybdenum, which is what stops pitting in chloride environments. Specify it for marine air, coastal sites, swimming pools, salt spray, chemical plant and food processing.

Diese Position wird von unserem eigenen Lager weltweit versandt. Express-Kurier, Luftpaket und Postversand stehen an der Kasse zur Wahl; die Sendungsnummer erhalten Sie per E-Mail, sobald das Paket übergeben wurde.