Button Head Socket Screw M6x60 Q195 Carbon Steel

Button Head Socket Screw M6x60 Q195 Carbon Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Technische Daten

Bestellung & Versand

Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.

Über diese Schraube

This is a screw in Q195 Carbon Steel, at strength class Grade 4.8, supplied colour zinc plated, with an M6 thread and a 60 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A screw threads directly into the parent material or into a nut, so the thread form, the point and the drive decide what it can be used for. Commonly used on machinery, tooling, appliances, electrical enclosures, furniture and automotive assemblies where the head has to sit low or be driven from one side only.

Q195 is a low-carbon Chinese structural steel used for general-purpose screws and light fastening. It forms easily but carries no defined strength grade — do not use it where the joint is load-bearing.

Colour zinc plating is an electroplated finish with a yellow/olive passivate — the older, thicker-passivate version with better salt-spray life than clear zinc.

Is this not quite the size or grade you need? Ask us — we produce small batches to drawing and to DIN, ISO, GB and JIS standards, and we consolidate pallet and container loads for trade orders.