Combination Tap & Drill Bit M3 HSS High Speed Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.
Technische Daten
| Werkstoff | HSS-Schnellarbeitsstahl |
| Durchmesser | M3 |
| Oberfläche | Weiß diamantiert |
| Marke | SFX Fasteners |
Bestellung & Versand
| Mindestbestellmenge | Kein Minimum – Einzelstücke willkommen |
| Preisgestaltung | Die Bestellsumme wird an der Kasse vor der Zahlung bestätigt |
| Sonderteile & Dropshipping | Kleinserien nach Zeichnung · Blind-Dropshipping auf Anfrage |
| Versand | 24–48 Stunden für Lagerware |
| Versand | Weltweit, an der Kasse nach Gewicht und Ziel berechnet |
Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.
Über dieses Werkzeug
This is a tool in HSS High Speed Steel, supplied white diamond, with an M3 thread. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.
A fitting, driving or measuring tool matched to the fastener sizes we stock, so the drive and the head are known to fit before you buy. Used for installation and inspection work, and for checking thread and dimension before an order goes into production.
M3 is a metric thread with an 3 mm nominal diameter and a coarse pitch of 0.5 mm (ISO 261). A standard hex head takes a 5.5 mm spanner across the flats.
A coloured finish, in most cases a dyed passivate over a zinc layer or a dyed organic film. Appearance plus light corrosion protection.
Sold by the piece, so one is a valid order. Stock lines leave our warehouse within 24–48 hours of cleared payment, and freight is calculated at checkout from the packed weight and the destination.

Reviews
There are no reviews yet.