DIN 976-1 Threaded Rod (Full Thread Stud) M16x40 304 Stainless Steel

DIN 976-1 Threaded Rod (Full Thread Stud) M16x40 304 Stainless Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Technische Daten

Gefertigt nach DIN 976-1. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Bestellung & Versand

Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.

About this DIN 976-1 threaded rod

This is a threaded rod made to DIN 976-1, in 304 Stainless Steel, at strength class A2-70, supplied plain, with an M16 thread and a 40 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

Threaded rod and stud bolts are cut to length on site, which is what makes them useful where the thickness of the joint is not known until assembly. Used for hangers, supports, strut and pipe brackets, anchoring into concrete, and as continuous studding through a bolted connection.

A2-70 ist Edelstahl 304, kaltverfestigt auf mindestens 700 MPa Zugfestigkeit und 450 MPa 0,2-%-Dehngrenze. Es ist die Standard-Edelstahlsorte für Schrauben und Muttern im Allgemeinen.

M16 is a metric thread with an 16 mm nominal diameter and a coarse pitch of 2 mm (ISO 261). A standard hex head takes a 24 mm spanner across the flats.

There is no minimum order and no free-shipping threshold: buy one piece or a full container. Your order total is confirmed in the cart, before payment.