GB 827 Nameplate Rivet M3x4 T2 Copper

GB 827 Nameplate Rivet M3x4 T2 Copper — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Technische Daten

Gefertigt nach GB 827. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Bestellung & Versand

Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.

About this GB 827 rivet

This is a rivet made to GB 827, in T2 Copper, supplied self colour, with an M3 thread and a 4 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A rivet is a permanent fastener: it is set once and removed only by drilling it out, which makes it cheap and tamper-resistant but not serviceable. Used on sheet metal, ducting, panels, luggage hardware and light structures where the joint is never meant to be opened.

M3 is a metric thread with an 3 mm nominal diameter and a coarse pitch of 0.5 mm (ISO 261). A standard hex head takes a 5.5 mm spanner across the flats.

T2 copper (99.9% pure) is used where electrical conductivity and corrosion resistance matter more than strength — earthing and electrical contacts.

Diese Position wird von unserem eigenen Lager weltweit versandt. Express-Kurier, Luftpaket und Postversand stehen an der Kasse zur Wahl; die Sendungsnummer erhalten Sie per E-Mail, sobald das Paket übergeben wurde.