GB 869 Countersunk Rivet M4x10 A00 Aluminium

GB 869 Countersunk Rivet M4x10 A00 Aluminium — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Technische Daten

Gefertigt nach GB 869. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Bestellung & Versand

Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.

About this GB 869 rivet

This is a rivet made to GB 869, in A00 Aluminium, at strength class AL4, supplied self colour, with an M4 thread and a 10 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A rivet is a permanent fastener: it is set once and removed only by drilling it out, which makes it cheap and tamper-resistant but not serviceable. Used on sheet metal, ducting, panels, luggage hardware and light structures where the joint is never meant to be opened.

A coloured finish, in most cases a dyed passivate over a zinc layer or a dyed organic film. Appearance plus light corrosion protection.

AL4 is a strength or hardness class as marked in our catalogue. Ask us for the mechanical property sheet if you need it written into a specification.

Sold by the piece, so one is a valid order. Stock lines leave our warehouse within 24–48 hours of cleared payment, and freight is calculated at checkout from the packed weight and the destination.