DIN 912 Socket Head Cap Screw M8x60 PA66 Nylon

DIN 912 Socket Head Cap Screw M8x60 PA66 Nylon — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Technische Daten

Gefertigt nach DIN 912. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Bestellung & Versand

Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.

About this DIN 912 screw

This is a screw made to DIN 912, in PA66 Nylon, at strength class PA66, supplied white, with an M8 thread and a 60 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A screw threads directly into the parent material or into a nut, so the thread form, the point and the drive decide what it can be used for. Commonly used on machinery, tooling, appliances, electrical enclosures, furniture and automotive assemblies where the head has to sit low or be driven from one side only.

DIN 912 is the same part as ISO ISO 4762, GB/T GB/T 70.1, GOST GOST R ISO 4762. Check the head geometry, the key size and the tolerances before substituting one for another — those do differ between systems.

A coloured finish, in most cases a dyed passivate over a zinc layer or a dyed organic film. Appearance plus light corrosion protection.

Sold by the piece, so one is a valid order. Stock lines leave our warehouse within 24–48 hours of cleared payment, and freight is calculated at checkout from the packed weight and the destination.