DIN 975 Fully Threaded Rod M16 316 Stainless Steel

DIN 975 Fully Threaded Rod M16 316 Stainless Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Technische Daten

Gefertigt nach DIN 975. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Bestellung & Versand

Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.

About this DIN 975 threaded rod

This is a threaded rod made to DIN 975, in 316 Stainless Steel, supplied plain, with an M16 thread and a 1000 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

Threaded rod and stud bolts are cut to length on site, which is what makes them useful where the thickness of the joint is not known until assembly. Used for hangers, supports, strut and pipe brackets, anchoring into concrete, and as continuous studding through a bolted connection.

316 (EN 1.4401, A4) adds 2–3% molybdenum, which is what stops pitting in chloride environments. Specify it for marine air, coastal sites, swimming pools, salt spray, chemical plant and food processing.

M16 is a metric thread with an 16 mm nominal diameter and a coarse pitch of 2 mm (ISO 261). A standard hex head takes a 24 mm spanner across the flats.

Is this not quite the size or grade you need? Ask us — we produce small batches to drawing and to DIN, ISO, GB and JIS standards, and we consolidate pallet and container loads for trade orders.