DIN 975 Fully Threaded Rod M16 45# Carbon Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.
Technische Daten
| Norm | DIN 975 |
| Werkstoff | Kohlenstoffstahl 45# |
| Festigkeitsklasse | Festigkeitsklasse 8.8 |
| Durchmesser | M16 |
| Länge | 1000 mm |
| Gewinde | Metrisch |
| Oberfläche | Schwarzoxid (gehärtet) |
| Marke | SFX Fasteners |
Gefertigt nach DIN 975. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.
Bestellung & Versand
| Mindestbestellmenge | Kein Minimum – Einzelstücke willkommen |
| Preisgestaltung | Die Bestellsumme wird an der Kasse vor der Zahlung bestätigt |
| Sonderteile & Dropshipping | Kleinserien nach Zeichnung · Blind-Dropshipping auf Anfrage |
| Versand | 24–48 Stunden für Lagerware |
| Versand | Weltweit, an der Kasse nach Gewicht und Ziel berechnet |
Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.
About this DIN 975 threaded rod
This is a threaded rod made to DIN 975, in 45# Carbon Steel, at strength class Grade 8.8, supplied black oxide (hardened), with an M16 thread and a 1000 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.
Threaded rod and stud bolts are cut to length on site, which is what makes them useful where the thickness of the joint is not known until assembly. Used for hangers, supports, strut and pipe brackets, anchoring into concrete, and as continuous studding through a bolted connection.
Grade 8.8 is quenched-and-tempered medium-carbon steel at 800 MPa tensile / 640 MPa yield. It is the most common structural bolt grade worldwide and must be coated against corrosion.
M16 is a metric thread with an 16 mm nominal diameter and a coarse pitch of 2 mm (ISO 261). A standard hex head takes a 24 mm spanner across the flats.
Diese Position wird von unserem eigenen Lager weltweit versandt. Express-Kurier, Luftpaket und Postversand stehen an der Kasse zur Wahl; die Sendungsnummer erhalten Sie per E-Mail, sobald das Paket übergeben wurde.


Reviews
There are no reviews yet.