DIN 975 Fully Threaded Rod M16 A3 Carbon Steel

DIN 975 Fully Threaded Rod M16 A3 Carbon Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Technische Daten

Gefertigt nach DIN 975. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Bestellung & Versand

Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.

About this DIN 975 threaded rod

This is a threaded rod made to DIN 975, in A3 Carbon Steel, at strength class Grade 4.8, supplied white zinc plated, with an M16 thread and a 1000 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

Threaded rod and stud bolts are cut to length on site, which is what makes them useful where the thickness of the joint is not known until assembly. Used for hangers, supports, strut and pipe brackets, anchoring into concrete, and as continuous studding through a bolted connection.

Grade 4.8 is low-carbon steel at 400 MPa tensile / 320 MPa yield. Suitable for light-duty, non-critical joints and the cheapest option per piece.

White (clear) zinc plating is the standard bright electroplated finish, typically 5–12 µm. Good for indoor and sheltered use.

Diese Position wird von unserem eigenen Lager weltweit versandt. Express-Kurier, Luftpaket und Postversand stehen an der Kasse zur Wahl; die Sendungsnummer erhalten Sie per E-Mail, sobald das Paket übergeben wurde.