GB 6170 Hex Nut M6 PA66 Nylon

GB 6170 Hex Nut M6 PA66 Nylon — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Technische Daten

Gefertigt nach GB 6170. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Bestellung & Versand

Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.

About this GB 6170 nut

This is a nut made to GB 6170, in PA66 Nylon, at strength class PA66, supplied white, with an M6 thread. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A nut is the closing half of a bolted joint. Its property class is chosen to match the bolt it is paired with — a class 8 nut for a grade 8.8 bolt, so the thread strips before the bolt breaks. Used wherever a bolt or stud has to be tightened from the far side, and for locking and positioning duties on machinery and steelwork.

A coloured finish, in most cases a dyed passivate over a zinc layer or a dyed organic film. Appearance plus light corrosion protection.

PA66 nylon is a strong, abrasion-resistant engineering polymer used for light-duty nuts, washers and cable hardware. Electrically insulating and non-marking, but it absorbs moisture and softens above about 100 °C.

Sold by the piece, so one is a valid order. Stock lines leave our warehouse within 24–48 hours of cleared payment, and freight is calculated at checkout from the packed weight and the destination.