GB 93 Spring Washer M2 65Mn Spring Steel

GB 93 Spring Washer M2 65Mn Spring Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Specifications

Manufactured to GB 93. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Ordering & shipping

Need a specific size, grade or standard? Send us a quote request — we quote to drawing and to DIN / ANSI / GB / JIS standards.

About this GB 93 washer

This is a washer made to GB 93, in 65Mn Spring Steel, at strength class Grade 4.8, supplied white zinc plated, with an M2 thread. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A washer spreads the clamp load of the fastener over a wider area of the joint face and keeps the turning nut or head from scoring the part underneath. Fitted under bolts, screws and nuts on soft or painted surfaces, slotted holes, and any joint that is taken apart often enough for the face to matter.

65Mn is a manganese spring steel used for spring washers, retaining rings and clips, where the part must stay elastic rather than rigid.

Grade 4.8 is low-carbon steel at 400 MPa tensile / 320 MPa yield. Suitable for light-duty, non-critical joints and the cheapest option per piece.

Is this not quite the size or grade you need? Ask us — we produce small batches to drawing and to DIN, ISO, GB and JIS standards, and we consolidate pallet and container loads for trade orders.