R-Clip (Spring Cotter) M2x35 65Mn Spring Steel

R-Clip (Spring Cotter) M2x35 65Mn Spring Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Technische Daten

Bestellung & Versand

Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.

Über diesen Stift

This is a pin in 65Mn Spring Steel, supplied white zinc plated, with an M2 thread and a 35 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A pin is a positive locator: it carries shear rather than clamp load, so it holds two parts in exact alignment instead of pressing them together. Used to locate and hinge components on machinery, linkages, hinges and tooling where a bolt would be the wrong kind of load path.

65Mn is a manganese spring steel used for spring washers, retaining rings and clips, where the part must stay elastic rather than rigid.

M2 is a metric thread with an 2 mm nominal diameter and a coarse pitch of 0.4 mm (ISO 261). A standard hex head takes a 4 mm spanner across the flats.

Sold by the piece, so one is a valid order. Stock lines leave our warehouse within 24–48 hours of cleared payment, and freight is calculated at checkout from the packed weight and the destination.