Wing Nut M12 PA66 Nylon

Wing Nut M12 PA66 Nylon — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Technische Daten

Bestellung & Versand

Sie brauchen eine bestimmte Größe, Festigkeitsklasse oder Norm? Senden Sie uns eine Anfrage – wir kalkulieren nach Zeichnung und nach DIN-, ANSI-, GB- und JIS-Normen.

Über diese Mutter

This is a nut in PA66 Nylon, supplied blue, with an M12 thread. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A nut is the closing half of a bolted joint. Its property class is chosen to match the bolt it is paired with — a class 8 nut for a grade 8.8 bolt, so the thread strips before the bolt breaks. Used wherever a bolt or stud has to be tightened from the far side, and for locking and positioning duties on machinery and steelwork.

PA66 nylon is a strong, abrasion-resistant engineering polymer used for light-duty nuts, washers and cable hardware. Electrically insulating and non-marking, but it absorbs moisture and softens above about 100 °C.

M12 is a metric thread with an 12 mm nominal diameter and a coarse pitch of 1.75 mm (ISO 261). A standard hex head takes a 18 mm spanner across the flats.

Sold by the piece, so one is a valid order. Stock lines leave our warehouse within 24–48 hours of cleared payment, and freight is calculated at checkout from the packed weight and the destination.