DIN 933 Hex Head Bolt Full Thread M16x150 PA66 Nylon

DIN 933 Hex Head Bolt Full Thread M16x150 PA66 Nylon — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Specifications

Manufactured to DIN 933. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Ordering & shipping

Need a specific size, grade or standard? Send us a quote request — we quote to drawing and to DIN / ANSI / GB / JIS standards.

About this DIN 933 bolt

This is a bolt made to DIN 933, in PA66 Nylon, at strength class PA66, supplied white, with an M16 thread and a 150 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A bolt passes through the parts it joins and is closed with a nut, so the joint is held by the clamp load the tightened bolt develops rather than by the shank itself. Bolts of this type are used on structural steelwork, machine frames, brackets, flanges and pipework — anywhere the joint has to come apart again for maintenance.

PA66 nylon nuts and washers are the insulating option: light duty, non-marking and electrically non-conductive.

M16 is a metric thread with an 16 mm nominal diameter and a coarse pitch of 2 mm (ISO 261). A standard hex head takes a 24 mm spanner across the flats.

This line ships worldwide from our own warehouse. Express courier, air parcel and postal services are all offered at checkout, with a tracking number e-mailed as soon as the parcel is handed over.