DIN 933 Hex Head Bolt Full Thread M16x80 PA66 Nylon

DIN 933 Hex Head Bolt Full Thread M16x80 PA66 Nylon — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Specifications

Manufactured to DIN 933. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Ordering & shipping

Need a specific size, grade or standard? Send us a quote request — we quote to drawing and to DIN / ANSI / GB / JIS standards.

About this DIN 933 bolt

This is a bolt made to DIN 933, in PA66 Nylon, at strength class PA66, supplied white, with an M16 thread and a 80 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A bolt passes through the parts it joins and is closed with a nut, so the joint is held by the clamp load the tightened bolt develops rather than by the shank itself. Bolts of this type are used on structural steelwork, machine frames, brackets, flanges and pipework — anywhere the joint has to come apart again for maintenance.

PA66 nylon nuts and washers are the insulating option: light duty, non-marking and electrically non-conductive.

DIN 933 is the same part as ISO ISO 4017, GB/T GB/T 5783, GOST GOST 7798-70 / 7805-70. Check the head geometry, the key size and the tolerances before substituting one for another — those do differ between systems.

Sold by the piece, so one is a valid order. Stock lines leave our warehouse within 24–48 hours of cleared payment, and freight is calculated at checkout from the packed weight and the destination.