Threaded Insert Nut M10x30 Q195 Carbon Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.
Specifications
| Material | Q195 Carbon Steel |
| Grade | Grade 4.8 |
| Diameter | M10 |
| Length | 30 mm |
| Surface Finish | Colour Zinc Plated |
| Variant | With Washer |
| Brand | SFX Fasteners |
Ordering & shipping
| Minimum order | No minimum — single pieces welcome |
| Pricing | Order totals are confirmed at checkout, before payment |
| Custom & dropship | Small batches to drawing · blind dropshipping on request |
| Dispatch | 24–48 hours for stock items |
| Shipping | Worldwide, calculated at checkout by weight and destination |
Need a specific size, grade or standard? Send us a quote request — we quote to drawing and to DIN / ANSI / GB / JIS standards.
About this thread insert
This is a thread insert in Q195 Carbon Steel, at strength class Grade 4.8, supplied colour zinc plated, with an M10 thread and a 30 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.
A thread insert repairs a stripped thread or reinforces a thread in a softer parent material, so a steel fastener can be used again and again in aluminium, plastic or castings. Used on castings, moulds, aluminium housings and any assembly that is dismantled often enough for the original thread to wear out.
M10 is a metric thread with an 10 mm nominal diameter and a coarse pitch of 1.5 mm (ISO 261). A standard hex head takes a 16 mm spanner across the flats.
Grade 4.8 is low-carbon steel at 400 MPa tensile / 320 MPa yield. Suitable for light-duty, non-critical joints and the cheapest option per piece.
There is no minimum order and no free-shipping threshold: buy one piece or a full container. Your order total is confirmed in the cart, before payment.
Reviews
There are no reviews yet.